Team Camaro Tech banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Electrical & Wiring
    Hi, I would really appreciate some help. I have a 1968 Camaro original column shifter with dash lights converted to manual console. I replaced the fuel gauge with a classic industries tic tock tach. I purchased the required circuit board and installed it as well. I removed the brown wire from...
  2. Restoration Corner
    Hi all, I’ve seen a few forums on this topic but am still having an issue removing the dash bezels from my 68 camaro. I removed the knob from the headlights by pushing the button. I unscrewed the set screw for the wiper knob but can’t get the knob off. And the bezels for all 4 (lighter...
  3. Interiors
    I have a 69 that, much like others I've read on here, had the original dash bezel cut out to accommodate a "modern" cassette deck. I have purchased a vintage radio from Antique Auto Sound, and a blank radio dash bezel from Classic Industries. My plan was to cut up the blank radio bezel to...
  4. Interiors
    My OER dash carrier for my '69 does not have holes to mount the top of the lenses for the speedometer and tach. I have been told by Classic Industries Tech Support that this is the was that they come. Also that you are supposed to somehow remove the machine screw insert out of the old dash...
  5. Electrical & Wiring
    I'm about to start wiring my 69 RS/SS after a frame-off restoration. I am adding Vintage A/C under dash. My question is whether anyone has any recommendations for anything I should do before or while I am doing the wiring or assemble the dash. Right now the car body is completed but otherwise...
  6. Pro Touring
    Hey Guys, I'm looking for someone who has installed a Classic Dash (aka "Thunder Road") 4 gauge center gauge panel. Classic Dash and Classic Industries sell them: (http://www.classicindustries.com/product/1967/camaro/parts/167254.html). The panel does not have a lip on the top edge...
  7. Interiors
    Hi everyone. I purchased a dash grab handle kit. My question is this: The long, rectangular retainer, isn't entirely rectangular. It is just a tad concave in the center. Or at least the one I have is. Is this the way it is supposed to be or did I get a defective reproduction? '69 Camaro convt...
  8. Interiors
    Can someone confirm that the OER speedo and tach (stock replacement) is mounted in some sort of carrier that is mounted behind the dash? For the life of me, I can't find one for sale on line. The assembly manual shows a piece that covers the back ends of the gauges, but I don't think it calls...
  9. Electrical & Wiring
    I have a 68 Camaro standard coupe. A few years back I wired the car with a painless wiring kit. At the time everything worked fine but the car sat for a few years now I am having trouble getting my running lights and dash lights working. I have replaced the headlight switch and made sure the...
  10. Member Classifieds
    Like these: http://www.heartbeatcity.com/store/product/21971/Camaro-Dash-cluster-harness-plug--69/ Probably a long shot that anyone has these laying around, but it's worth a try. They're asking $20 a pop for them there, but they don't guarantee that they'll have the wiring included. If you do...
  11. Electrical & Wiring
    I pulled out an Auto Meter 6-gauge cluster from my 69. I'm replacing it w/ original dash, w/ clock, fuel and speedo, with a stand alone water temp. I would like to add a tach later. All the other wiring works fine and is new, even if it's not the prettiest. I found this dash harness...
  12. New Member Introductions
    Need to replace the bezel that houses the speedometer and fuel gauge, looking for help after removing the obvious screws what the next steps will be. Do I need to lower the steering column as well during this process? Any advice would be appreciated. Thanks, Vance
  13. camaro_dash

1-13 of 13 Results
Top