Team Camaro Tech banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Brakes, Suspension & Steering
    Hey all, I'm looking to convert my 68 327 from power drums to power discs on all 4. I'm looking at conversion kits that include all the harware, even MC and booster, but I'm unsure of which way to go. I even considered doing front only Wilwoods; but keeping rear drums seems more complicated that...
  2. Brakes, Suspension & Steering
    I was on the freeway this weekend, as i shifted into 5th, i noticed the brake pedals turn extremely hard/stiff to press. I exited, coming to a stop sign. As i shifted back to 1st and pressed the gas pedal it felt like the handbrake was pressed in but wasn't it was so difficult to move the car...
  3. Wheels & Tires
    Hey guys- I'm finding a ton of information online about 15x7 and 15x8 rally wheels, but not much when it comes to 15x6. I recently got my hand on an old set of 5 YS-stamped rally wheels, centers and lips- 15x6 with 3.5" backspacing. (decoded specs- YS 15X6 BS-3 1/2 68-70 El Camino). The wheels...
  4. Brakes, Suspension & Steering
    Does anyone have the dimensional differences between a 67 caliper bracket and a JL8 bracket? Also the differences between calipers? I'm looking for a work around the $400 JL8 brackets... Thanks, W
  5. Wheels & Tires
    I have a set of 14x6 rally wheels that I picked up several years ago from an old body shop. These are GM wheels and are coded as. K 182 8 (valve stem hole) 30 XG. What does this mean? One still has the GM sticker on it. They are all black and appear to have never been on a car. I would like...
  6. Classic Industries
    Hi, I am close to order front disc brake kit I have a few things I would like to straiten out before I order. My -67 Camaro has manual drums brakes. * Is the kit complete or is there anything else I need to order (I will build the...
  7. Brakes, Suspension & Steering
    I took the challenge to swap drums to discs on the 9" ford. After some reading, I went with the explorer swap. Mainly because it was a direct bolt on conversion. Probably the easiest project so far on this car. On a 68 I used the passenger side setup on both sides of the camaro, because of the...
  8. Brakes, Suspension & Steering
    Does anyone do a simple conversion kit that'll fit inside 14" wheels on a 68? I'll be upgrading my wheels eventually (and bigger brakes).. But i need something in the meantime to improve the brakes for certification. (They're sticklers for safety down here) Thanks.
1-8 of 8 Results