Search Results for ‘fuse block’

I can’t get 12 v. to anything inside the firewall on my stock 1968 Camaro ? Voltage is fine from Battery to Rad. Support junc. Block (and to starter), and fine to horn relay, voltage Reg.#3 terminal, and from Horn relay to 14 Ga, Red wire to the bulkhead multi-conn. ALL AS LONG AS THE...

So I finally got to a point last night er this morning at 1:30 am that I could attach my battery and turn the key.... However when I insert the key nothing happens at all. Here is some more background: 1. The battery has a full charge. 2. All the fuses are installed. 3. The front end was...

Hi, When my car was converted to HEI the original resitance wire ignition lead was clipped off and a section of primary wire was crimped to it. I wanted to replace the whole lead with a new, clean, wire. I pulled the connector from the firewall and was expecting to see Packard 56 blade type...

Hey fellas- This should be an easy one. My fuse block for my 69 has the following terminals available: LPS (Free) IGN (occupied) ACC (occupied) BAT (Free) Which of these can I connect my IGN controlled wire for the fan? Do I double tap off of the IGN spot or would one of the open ones do...

i am wiring an after market radio into my 69 and all of the radio wires are gone. can i just hook a wire into the acc port on the fuse block for power to the radio and hook one wire to the battery port for memory? if i do it this way will the radio be fused or will it mater since the radio has a...