Team Camaro Tech banner
ignition problem
1-5 of 5 Results
  1. Electrical & Wiring
    Two-month newbie here! šŸ˜Š My 69 Z was starting relatively well (a few instances where the starter wouldnā€™t turn, usually when I accidentally stalled out) until a month ago. The starter turned during the first two attempts, and then nothing ever since. No click from the solenoid, just silence...
  2. Electrical & Wiring
    Thanks for the help everyone. Here's my problem. I have a 69 SS350 thats was completely rewired with an American Autowire kit in 2015. The ignition is a Mallory 6A wired to an HEI distributor. The coil on the distributor has been bypassed for the Mallory. A few weeks back, I was sitting in the...
  3. Electrical & Wiring
    Hello, Having issues with my starting. History before issue: Camaro was insure for the spring summer season, started up perfectly after a few pumps of the accelerator, tank was topped up before having it sit for 4-5 months. Battery wires were removed when parked, and re-attached when ready to...
  4. Troubleshooting
    I have a '94 3.4 auto floor shift. I had my car diagnosed with a switch on the column being bad. They said there are 2 ignition switches, 1 that the key goes in and 1 on top of the column under the dash. It has a set of contacts on one side and a hole in the end and another hole for a rod that...
  5. Troubleshooting
    Hi, I've come 360 degrees from when this problem began. To begin with, I experienced my car not wanting to turn off when the ignition was switched into the off position. Like many others have had problems with, I could pull the key out and walk away while the car kept idleing perfectly. I...
1-5 of 5 Results
Top