Team Camaro Tech banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Engine
    I just completed a T56 conversion from a 400 auto in my 69 Camaro. The engine is a professional build 383 approx 2 years old. Prior to the trans swap there were no visible oil leaks (no drops on the garage floor, etc) and a very clean engine. Took me a month to finish the new t56 setup, but...
  2. Transmission & Driveline
    TH350 transmission is leaking oil where the oil dipstick tube enters the housing (red arrow in pic below). Also the tube is loose in the hole. I can pull it out and put it back so I do understand why it is leaking. How should it be sealed?
  3. Fourth Generation
    Ok guys im a female looking for answers. I have a 1995 z28 it has just started leaking oil. Have changed the valve cover gaskets changed oil filter checked drain plug. Also checked the pcvthing and it sucks good. I noticed that my dip stick is loose and the top plastic piece is broke so it...
  4. Engine
    Hi, I have an oil leak somewhere. Could it be the bolt above the oil that is the culprit? Do I have to remove the manifold and replace the gasket to get it sealed? As you maybe can see there is also oil on the T-stat housing but it might be the fan that blows the oil on that... Rgds/Mikael
  5. Engine
    I have a 2001 with a v6 with about 130,000 miles. I noticed that it is losing coolant - getting to the point of running hot about once a month. It isn't obvious where it's going. It recently started having a lot of value clatter when you crank it. Does that for a couple minutes then runs...
1-5 of 5 Results