Team Camaro Tech banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Troubleshooting
    Decided to get an oil cooler for my -68 with Chevy Performance ZZ4 383, but ran into some problems. I got a B&M oil cooler and a Derale oil filter adapter. Made some hoses with low pressure hydraulic fittings (I don't like hose clamps) rated to 16 bar/232 psi. Took the car fore a test drive...
  2. Engine
    So I have a 91 b4c with the L98 350 and it is kicking oil out of the dipstick tube all over my ps header and valve cover. If i put a quart in the pressure goes way up past the black lines then as I drive it the ps engine compartment starts smoking. I pop the hood and my ps valve cover and header...
  3. Engine
    I have a 94 3.4L with high oil pressure. I'm using 5w30 as spec'd and just changed it & the filter with no change in the pressure. There were no shavings in the old oil. Pressure seems to drop to 75-80 after warming up for 20-30 minutes. On start up, it is maxed out. Autozone (here) does not...
1-3 of 3 Results
Top