Search Results for ‘radiator’

Recently had a new Champion Aluminum BB 3-core radiator installed in my 69 SS350 due to leaking original. Went oversized based on multiple suggestions. Issue now is that the stock fan shroud (p/n 3938615 for the SB350) does not sit correctly on the radiator. It rests on an angle on the radiator...

I wanted to drop a quick review on this new radiator I just installed. I have built a stroked big block for my '69 and wanted to be able to drive and not constantly have to keep an eye on engine temps even during the hottest TN summers. I looked at many manufacturers and read countless reviews...

Hello: I want to get my original radiator re-cored and restored to factory original for my '68. Any shop recommendations in Southeast Michigan? Also, it is a 2-row original radiator and I am unsure if I should upgrade to 3-row. There's an old saying "more is better" but is it really necessary...

I'm in the process of replacing my leaky old radiator and during this process I found out that replacing a radiator is not a simple thing to do especially if you don't know what all may have happened to the vehicle. Initially, I was sold an American Eagle radiator that was guaranteed to fit but...

I have several radiator tanks: 1 69 set coded CB H(August) with other tank HI 3 68 sets coded OD with dates of J(October) A (January) D (April) all with HI tanks. All have mounting brackets Sold in sets. $300.00 501-450-0324

Camaro 69 Z Radiator for sale CB Code with J (October) Date Radiator is considered a Core. I have not tested it. The end pieces come with this but are not attached. In good shape. I can't get pictures to load. Will send pictures when requested. $575.00 plus shipping.

I have a 69 Camaro Z/28 Radiator CB code with M (December) Date. This is considered a Core. I have not tested the Radiator. See pictures. $650.00 More pictures available but not able to add here.

Hey guys... It's been said that you shouldn't solid mount a radiator to the core support. If this is true? Why? And if it's true, how should I go about mounting it? I'm reading about rubber mounts but I can't seem to find any camaro-specific ones. Any help is appreciated!

So.....hey guys. I feel kinda like a dummy for needing to ask about this but I can't seem to keep coolant off the ground. I had a leak so I decided to change the lower hose and upper hose, plus they were old and needed replacement. I changed them and used some of those worm gear clamps, but I'm...

Hey guys, I've got some hoses that need changing due to age and leaking. I can't seem to find any that fit at my local auto part store, but I remember seeing some universal ones on a couple cars here and there. They may work for the upper but what about the lower? The current lower I have has a...

All, I am looking for a shop to do a repairs/restoration on my radiator from my 1969 Z28/RS. I am in Portland, Oregon and would be willing to ship mine to a shop that does this type of work or who is known to do quality work, closer to Portland the better. Any input on shops that are near...

Hey guys, I have a '67 with a 383 and ls1 fans. Standard alternator. These fans pull a significant amount of current and when coupled with the headlights being on at night, the alternator performs less than great. As a result, the fans don't cool as well because they're not receiving the power...

Hi, Can someone enlighten me on what is a "correct" radiator for a 68 Yenko? I've been told a 4 row aluminum radiator was available. Is this the so-called "curved neck" radiator? Are reproductions available, and if so, from whom? Thanks, -Louie

Help!!! Replaced entire cooling system & still having cooling problems Hey Everyone! I am at the point where i almost just want to sell this damn thing and start over! I have a 68' RS with a 350 engine. Nothing major has been done to the engine and it runs pretty close to stock. I have been...

I’ve searched the forums here multiple times looking for some direction, have tried a few minor adjustments but not getting fantastic results so I thought I’d ask for thoughts. Here’s the setup: 1968 Camaro SS, 502 GM Crate motor, TH 400 Trans. Aluminum short-style water pump, Power...

I recently replaced the single core radiator in my 1967 Camaro with a three core aluminum radiator. The old radiator had a small leak on the end tank. I'm not sure if this was the original radiator or if it's even worth repairing, however I don't want to throw it out if someone wants to repair...

I have a 68 with a 96 lt1 with the oil cooler. I am having problems finding a quality radiator that matches the 2 supply and 2 return line configuration required by the lt1 that will fit the 68's 21x17" core support. any suggestions? It seems that In addition to the standard supply and...

I just bought a 1968 Camaro RS with a 350 engine. When I bought it I was told that it has issues with overheating on warm days. I believe the radiator id copper and I'm running the six blade mechanical fan with a shroud. I want to increase the airflow, even at highway speeds, with minimal...

i have a 68 with a smallblock 350 4 speed trans. if the car idles even for a little bit it starts to get hot and fast. i ran water through the radiator and the block. i flow tested the radiator and everything was alright. i bought a new thermostat. I also put new antifreeze in it but it still...

So I got my 75 with AC back from the body shop and these guys did one sorry job. I've been doing nothing but fixing mistakes since I got it back, I should have just done it all to begin with and saved myself the two months. Well they installed a "new" radiator. Anyway after driving it for a...