Team Camaro Tech banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Restoration Corner
    Hello everyone- I was wondering if anyone has a photo of the metal line that connects to the screw-in PCV on the oil fill tube and then connects to the front vacuum port on the base of the quadrajet. I think the line may be 3/8. Thank you, Jerry
  2. Troubleshooting
    I have a 1994 Camaro Z-28; I purchased it with blown head gaskets not knowing how many other things was wrong but over a few weeks an hour at a time I found out. After I redid the heads, I added a water pump, plugs and wires, radiator, thermostat. I started it and it ran very well but the SES...
  3. Engine
    Hello everyone- I have been on the hunt trying to find the correct smog tubes for my 67 SS with A/C. I read a lot of the aftermarket ads read without A/C. Does anyone have a photo of the different types. Why would they be different? Your help will be much appreciated. Thanks, Jerry
  4. Restoration Corner
    Hi guys. some of you may recall that i reunited my original engine with my camaro after 40 years of being apart. The engine is in great shape as the last owner has it all cleaned up and bored .30 over with new pistons etc. I am now trying to find out the exhaust and air cleaner configuration...
  5. Troubleshooting
    would love help! 87 iroq w/305 engine. Replaced EGR valve, EGR solenoid, knock sensor, wires, plugs, rotor cap, spark ignitor, TPS (throttle positioning sensor), TSU (temp sending unit). Second smog test gives Fail for NO of 916 ppm (max 772) @15 mph but passes with 628ppm at 25mph. Have run 2...
1-5 of 5 Results