Team Camaro Tech banner
1 - 2 of 2 Posts

·
Registered
Joined
·
551 Posts
Discussion Starter · #1 ·
I have an opportunity to have a set of rims made for me and can chose between 15x8 or 15x10 for the rear. What would be the best backspacing you would recommend not to rub anything with a stock setup - note: overhang out the wheel well is not a concern but I would like as minimal as possible.

Thanx
T
 

·
Registered
Joined
·
551 Posts
Discussion Starter · #5 ·
OK - so its time to order - I am going with 15x8's and will be using 255/60/15's but may go bigger in the future. Also I'd prefer to bolt up and go at this time without suspension mods. With all that bring said - what backspacing. The prefab choices are 3.75 & 4.75, but I can custom order whatever is the concensus. Thanx again for all the input.

oh yeah and overhang is not an issue for me I like both looks

edit - these rims will be for the rear only btw
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top