Team Camaro Tech banner
1 - 5 of 5 Posts

·
Registered
Joined
·
204 Posts
Discussion Starter · #1 ·
Hello,

I have a January 69 CE block, crank, pistons, rods, cam, lifters and oil pan. Here are the specs:

Block casting 3956618 dated A 28 9 STD bore
engine stamping CE9A321

Pistons casting 3927172 (VERY LOW MILES) no wear on the skirt grooves

Rods are pink "O" full floating

Crank is STD 1178

Cam is #7141. That's the first off-road design cam. The "140"./Int.lift .493/exh .512/ int dur 333/ exh 346 (info provided by 68zproject)

If anyone is interested please pm or email me. I have detailed photos. It is currently disassembled. I would like to see a Team Camaro member get this rotating assy. I will accept offers or 1st gen projects for trades. If not I will be listing it on Ebay.

Thanks

Tom
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top