[Marc]

It looks so clean! No mufflers to start with?

 

[srode]

It looks so clean! No mufflers to start with?

I thought about it Marc, but not sure which versions to get yet - will let whoever ends up finishing the exhaust sort that out. My ears might regret that choice though.

 

[srode]

Playing around with a piece of ABS at the local makerspace this evening. Not something I'll use for a finished product but it gave me some ideas. Measured the breaker as 2 1/8 inch diameter and the laser cut it for a nice snug fit.

 

[srode]

Gauges powered up. The app to set them up is available for android via bluetooth but it doesn't work on any android devices I own so It's either program using the buttons or get Stephen to put the app on his I-pad and do it. Not sure I should trust him to have access to my gauges though.....

 

[srode]

Stephen set them up today - had to disconnect the fuel pump first so it wouldn't burn up with the ignition on

 

[Worn Out Welder]

I’d bet those young men are more than trustworthy 👍🏼
I’d base that on Mom keeping Dad in line, but that’s just a guess 🤷 😆

 

[srode]

I’d bet those young men are more than trustworthy 👍🏼
I’d base that on Mom keeping Dad in line, but that’s just a guess 🤷 😆

Well, he is an Eagle Scout - and it's part of the scout oath so he 'Should' be trustworthy!

 

[Worn Out Welder]

I’m certain they are going to be men of integrity
As I have stated before they are being guided by a man’s man from the worn out welders perspective 👍🏼

 

[srode]

I’m certain they are going to be men of integrity
As I have stated before they are being guided by a man’s man from the worn out welders perspective 👍🏼

Keep it up and I'm going to have to drive down there and take you for a ride in this thing, if it ever get's done! LOL

 

[srode]

This is going to suck..... I hope

Need to get a longer tube for the aspiration exhaust to keep it from blowing fluid bits all over the engine.

 

[srode]

Best Ben and I could get with this system and 100psi air on the intercooler.

 

[Worn Out Welder]

I would think that’s a considerable vacuum for that method.
Surely that is adequate to pull any air pockets.

 

[srode]

I would think that’s a considerable vacuum for that method.
Surely that is adequate to pull any air pockets.

We'll probably do another run and call it good enough tomorrow, then on to the radiator. The coolant pump sounds pretty stable now.