Team Camaro Tech banner
1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I have a new in the box 5754 cam (# on the tube) but on the cam itself on the back is 965418. Does this check out or should 5754 be on the cam itself. Thanks!
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #3 ·
Hi, I was thinking of that. I have done some searching on both those #'s but only the 5754 # comes up. Can't find any info on the other # thus far.
 

·
Banned
Joined
·
21,341 Posts
Why don't you dial caliper it to find out what it's gross lift is..

Just do the lobe first, then over around 90 degrees and subtract the lobe from the around 90, then multiply by the 1.5 rocker arm ratio.

Should be .495"/.512" gross lift if not mistaken, please check me here guys..

pdq67
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top