Team Camaro Tech banner
1 - 7 of 7 Posts

·
Registered
Joined
·
457 Posts
Discussion Starter · #1 ·
I want to try and find a date coded block for my 67 I know the 302 327 and 350 all use the same number 3892657 is ther any other numbers to look for.
I know there are numbersand letters on the deck of the block but if the have been shaved that wont help and you never know if someone would tell the trouth about the bore size.
Thanks Bob
 

·
Registered
Joined
·
209 Posts
Bob:

That is the only block that I know of used for the 67 Camaro V8 that has been documented.

Dave
 

·
Registered
Joined
·
209 Posts
Russ:

The 3352 was indeed used on the 327 but not sure it was ever documented in the Camaro for 67.
Dave
 

·
Premium Member
Joined
·
1,823 Posts
1967 302, 327, and 350’s used the 3892657 block but the 350 blocks were machined different to accept the new 350 crankshaft with larger mains. A good machine shop should be able to convert any small journal “657” block to accept medium journal main bearings and any common 350 crank.
1967 3892657 Engine Block Peculiarities - Team Camaro Tech
 

·
Registered
Joined
·
4,387 Posts
never know if someone would tell the trouth about the bore size.
Thanks Bob
302, 327 and 350 are all 4" bore engines.The crank stroke was different 3" =302, 3.25" = 327, 3.48 = 350.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top