Team Camaro Tech banner

1 - 1 of 1 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Need some help with my taillights. Currently, they are not working at all. I shot the wires for continuity and they are good. I know there is power at the wires, because they keep sparking whenever they touch ground with the lights on. I tried to shoot for power, but I think there may be something wrong with my multimeter. I have also already checked the fuses and cleaned the contacts at the headlight switch. Therefore I am thinking there may be a problem with the way I am hooking up the wires. I have the brake lights and the turn signals going to the outside lamps. This leaves 4 taillight wires for the inside lamps. I tried connecting 2 wires per light and 1 wire and 1 ground per light. Nothing happens. So, if you know the correct way to connect the wires, please let me know. Thanks. -maya
 
1 - 1 of 1 Posts
Top