Team Camaro Tech banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Installed a new kit which included door assemblies, canisters, tank, hoses and installed new headlight switch. I put a vacuum gauge on the end leading into the intake and can generate 12" of vacuum but the doors will not operate. They opened when I pulled the switch but won't close even when I nudge them. Does it take morre vacuum or what? The car is completely restored and this is my last issue. Any help is greatly appreciated.
 

·
Registered
Joined
·
226 Posts
Make sure you have the one way check valve. I'm not sure, but if memory serves me right this can be the culprit. Others may know better and will chime in. also, when open try pulling the switch out on the vacumm tank and see if they close....they should.
 

·
Premium Member
Joined
·
8,375 Posts
Welcome Ken. Let me get this straight. You've done a complete restore without us?!
 

·
Registered
Joined
·
995 Posts
1 - 5 of 5 Posts
Top