[68nou1]

I'm almost finished with my 68 and would appreciate any help I can get on this subject. I've installed a set of hotchkis 2" lowering springs in the front and it looks like I've got to much positive camber. The wheels have got a noticeable lean out at the top. Right now I've got stock upper and lower control arms and I'm wondering if I will have to get a set of the hotchkis uppers to correct this? Haven't been to my alignment shop yet, was wanting some good input first.

 

[Everett#2390]

You might add equal number of shims to the upper control arms.

 

[dhutton]

You should get it aligned before worrying too much about this. I also recommend you research where you want the alignment set because factory is not where you want it on a pro-touring car.

Don

 

[allanjs]

Chad, Don't sweat over it. Take it to a reputable alignment shop. They
should be able to explain to you what is needed if anything other than
just an alignment.

 

[68nou1]

Thanks guys, appreciate the input. Keep the tires spinning and the women grinning!!!