Team Camaro Tech banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi,

I recently installed RGB LED lighting under the dash. Used an LED Controller as usual. Still working out some kinks with connectivity, could be a faulty connection on the strip. However, my real problem is finding a fuse in the driver's side fuse box that cuts the power when the car is off and returns power when the car is on. Every fuse i have tried so far is live even when the car is off and I have to remember to turn off the LEDs with a remote when exiting. I have heard possibly use fuse F17 but have not tried it yet. Any ideas? Do i need to tap into the ignition line itself for that?

Its for a 2010 Camaro RS.
 

·
Premium Member
Joined
·
2,050 Posts
you're kind of on the wrong forum. There are some people with 5th gens here, but it's mostly a first gen site. You probably want to go over to Camaro5 if you need help with your 5th gen. You're much more likely to get a quick answer there.
 
1 - 3 of 3 Posts
Top