Team Camaro Tech banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
249 Posts
I did the math once, but can't remember exactly. I cut the weight on my flywheel on my J*p*n*s* car from 22 lbs to 12, and I think it was a 15% acceleration improvement in 1st gear. You get almost nothing in higher gears.

I know that sounds like a lot for a 10 pound cut, but it is rotational inertia at a high rpm. 0-60 times reduced by about 0.2 seconds.




Sent from my Autoguide iPhone app
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top