Team Camaro Tech banner
1 - 8 of 8 Posts

·
Registered
Joined
·
89 Posts
Discussion Starter · #1 ·
Hi, my 69Z is heading to the body shop to "bring back" the fire wall to original. Car was a show car and someone had smoothed over the seams on the engine side of the firewall. So out comes the grinder next week to remove the body filler they used to smooth. What I'm looking for are some more pictures I could provide my body guy to show what is correct from the blower motor cover to the wiring harness connector. Thankx, John
 

·
Premium Member
Joined
·
6,709 Posts
Here's a pic of mine after sandblasting. Notice someone took a BFH to the middle of the firewall to provide room for a HEI distributor. I tried to pull it out but the metal here is real thick so I pulled as good as I could and then filled it back to original.
http://hobbystage.net/camaro/media.cgi?site=jonesy&folder=*&group=1&page=*&id=1024177588-000408



------------------
1969 Camaro RS/SS 350/4spd, Azure Turquoise (55-55)
Van Nuys Built 11B
currently on the rotisserie
see pics at http://hobbystage.net/camaro/jonesy/

1984 Z28 w/ZZ4 conversion 25th car to roll of the line at Van Nuys
 
1 - 8 of 8 Posts
Top