Team Camaro Tech banner

1 - 2 of 2 Posts

·
Registered
Joined
·
233 Posts
Discussion Starter #1
I am installing a power disk brake conversion kit. The kit came with two rods that go from the power thing to the master cyclinder. One is about 3 inches and the other about 5 or 6 inches. The instructions did not cover this. Which one to use?

thx

-Rob
 

·
Registered
Joined
·
174 Posts
Bob what u are talking about are the push rods that go from the brake booster to your master cylinder. there were two lengths used. Depending on which style master cylinder you have will dictate which rod you use. look on the back side of the master cylinder (the part that attaches to the fire wall) is it Deep or shallow that will tell you.

Dennis
 
1 - 2 of 2 Posts
Top