Team Camaro Tech banner

1 - 5 of 5 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1
I need some cam help. I have a 69 350 engine , recent rebuild before I got it. It has trw flat pistons -6.1cc,I put a set of edlebrock alum. 64cc heads.Holley 600 and headers. The cam in it is an Ultradyne 276, 454 lift, 221/221 duratiion. I think this cam was for trucks. I am putting engine in a 68 camaro cruiser,no racing.It has 350 turbo ,B&M torque conv, no power brakes
I want a mild street cam. Is the Ultradyne 276 ok or what should I get. Thanks for any opinions.
 

·
Banned
Joined
·
21,341 Posts
It will be a dandy for you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Here it is..

276/276 110 .454/.454 221/221 350-400 pick-ups, 4WD, Street performance. 1500-6000

pdq67
 

·
Registered
Joined
·
123 Posts
It will be a dandy for you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Here it is..

276/276 110 .454/.454 221/221 350-400 pick-ups, 4WD, Street performance. 1500-6000

pdq67
I agree, the cam is just right for a cruiser. It should have good power and good gas milage.
 
1 - 5 of 5 Posts
Top