Team Camaro Tech banner

1 - 4 of 4 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter #1
I am converting my 67 rs camaro from an automatic to 4 speed. When we got the motor and tranny on their mounts we noticed there was no room for the clutch fork to be pushed in. It only had 1/8" clearance from the firewall and the bellhousing I am using is part #464697.

Any Suggestions?
 

·
Registered
Joined
·
2,803 Posts
if you do a search on this topic you will find what went wrong..


wrong clutch fork is likely the cause
 

·
Premium Member
Joined
·
2,177 Posts
The 697 bellhousing is a direct replacement for the 621. You do need to make sure that the clutch pivot ball on the 697 is on the top boss. Thats the main difference between the 2 bellhousings. The 621 only has 1 place the ball can be mounted to. It can like posted above just be the wrong fork. Also are you sure you have the fork mounted correctly on the throwout bearing.

 
1 - 4 of 4 Posts
Top