Team Camaro Tech banner

1 - 3 of 3 Posts

·
Registered
Joined
·
677 Posts
Discussion Starter #1
Just installed a new engine harness on my '69. I took the old one off a couple months ago and didn't pay close attention on which wires go to which terminal on the coil. Figured I'd just rely on the schematic in my assembly manual. I know the orange/white and yellow go to the positive and the wire from the distributor goes to the negative. Which side does the brown wire coming from the harness go on? I don't see a brown wire in my assembly manual. Is this the wire from my tach?
 

·
Registered
Joined
·
1,669 Posts
I believe so, and the tach drive should go to the negative side of the coil....
 
1 - 3 of 3 Posts
Top