Team Camaro Tech banner

1 - 3 of 3 Posts

·
Registered
Joined
·
133 Posts
Discussion Starter #1
I’ve made some posts about trying to get my car more street-able.
Pulled out the front shocks and there Comp engineering C2600 Drag shocks 90/10 value rate.
Ok time for new shocks. I did a search on this and from what I’ve read it looks like I should get Bilsteins, Koni Yellows and maybe Monroe. Stay away from KYB.

About the car 1967 pro-st. big block with cast heads. When the guy built it back in 1988 he cut the front coils. Reading another post on springs and taking some measurements it looks like if I run Hotchkis 1906F 2” drop coils I’ll have the height I’m looking for.

With that being said does anyone have a part numbers for any of the above brand shocks I need with a 2” drop?

Thanks in advance one again:thumbsup:
 

·
Super Moderator
Joined
·
32,340 Posts
Fully extend the shock and turn to set the rebound/extend, three positions
90/10, 70/30, and 50/50.

Otherwise, I'd get Monroe.
 

·
Premium Member
Joined
·
9,357 Posts
50/50 is good for street..but monroe is a good choice too!
 
1 - 3 of 3 Posts
Top