Team Camaro Tech banner

1 - 6 of 6 Posts

·
Registered
Joined
·
200 Posts
Discussion Starter #1
I am restoring a 69 camaro i removed my interior the floor pans have only surface rust i took a angle grinder with a wire wheel and cleaned them all is very solid my question is what to cover the pits the surface rust left thanks
 

·
Registered
Joined
·
2 Posts
Greg,
I just got done ssandblasting the entire underneath of my 68 camaro,I used a product called POR-15 on it and the stuff is really
good. You can brush ,yes brush this stuff on and it will show "0" brush marks.It is made to put directly over a rusted surface but needs some chemical etching. The company advertises in Car-Craft and Hot Rod.If I did
this again I wouldn't hesitate to use it.
I was skeptical but I'll recomend it now !!
 

·
Registered
Joined
·
200 Posts
Discussion Starter #3
thanks for the information it will be helpful but i should have indicated i was talking about the inside floor pans .thanks
 
1 - 6 of 6 Posts
Top