Team Camaro Tech banner
1 - 1 of 1 Posts

·
Registered
Al - Waterloo, Iowa
Joined
·
5,578 Posts
The caliper appears to be 69 Camaro. Measure the length of the hose and then compare it to spec's from O'Reilly's or whatever supplier you choose. If the bump stops are still in place chances are the banjo bolt hits them if I'm correct on the calipers being 69 Camaro. The retrofit kits use 70 Monte Carlo (and others) style calipers that position the banjo bolt on the bottom. Something to check out.
 
1 - 1 of 1 Posts
Top