[canadianpride]

Hey there guys, I'm having a problem wearing out the outside of my front tires and I want to take her to town to get an alignment but so far nobody knows the spec for my 67' camaro rs. Does anyone know what they are? It would be much appreciated.
Marc

 

[400bird]

enjoy, but make sure you take it to a good shop that will check the condition of all your bushings, ball joints, tie rods, etc.
i had a worn idler arm that caused me to eat through the inside edge in 6,000 miles

here is a link to david pozzi's site, amazing information there, including alignment specs
http://www.pozziracing.com/first_gen_suspension.htm#Alignment specs

 

[mkpatrick]

He's right.

I changed my bushings to urethane and then had an alignment done and it actually bought me some time in the 1/4. My toe in was really bad and it was costing me some time.

 

[canadianpride]

Thanks Guys. As soon as the snow melt I take her to town.
Take care!!
Marc

 

[JimM]

I don't know the "stock specs" they were weird...

If you have it aligned for 1/4 neg camber, as much pos caster as you can get (3-4 degrees would be good, this is much more than stock and may not be possible), and minimal (1/16" or less) toe your ires will last and you'll like it.