[57s67RS/SS]

I replaced the stock front sway bar with an aftermarket unit from CPP. During removal of the original equipment I damaged the threads on one of the four threaded holes in the subframe (FAIM UPC3 A5). When I try to tighten this screw it threads in and out but cannot tighten to 10 ftlb. Any suggestions on how to fix this?

 

[allanjs]

Not an easy place to access but with the bumper removed you can see the bolts.
Get a Keps nut (star washer attached nut) position it with an extendable magnet
and thread the bolt in.