Team Camaro Tech banner

1 - 2 of 2 Posts

·
Registered
Joined
·
223 Posts
Discussion Starter #1
i am tring to sell a sconsole of mine and have no idea if these holes are factory or not.

i have it on ebay (this is not a cheap ploy to get views on it)

and just want an understanding if any of the holes in it are factory? there are a couple on the top in front of the shifter plate, and one on teh driver side and 3 on the passenger side.

there are pictures on my auction

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2441750000&category=6755

and mods, if it is inappropriate for me to post that link, please take it down.

i seriously just am lookin for a little more info for my piece of mind so i can represent the product better.

thanks

rick
 

·
Registered
Joined
·
1,940 Posts
The counter-sunk holes on the front sides are for the front mount, the holes in the box and under ashtray are for the bottom mounts and are broken out. The hole in the box should be smaller in diameter. The holes on the top suggest an aftermarket tape deck but the two smaller on the side were more than likely for a C.B. mounted on the top with the microphone on the side.
 
1 - 2 of 2 Posts
Top