Team Camaro Tech banner
1 - 1 of 1 Posts

· Moderator
15,380 Posts
I'd find the exact spot on the panel and cover it with a couple layers of heavy 1 1/2" or 2" masking tape, mark the hole on the tape with a pen or whatever, and use the sharpest razor blade you can find to cut the circular hole in the upholstry. Then keep slowely working on the backing material until you have the hole all the way through.

You could drill it with a hole saw on your drill but I'd think it would bind or tear up the upholstry.

My .01
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.