Team Camaro Tech banner

1 - 8 of 8 Posts

·
Registered
Joined
·
1,059 Posts
Discussion Starter #1
Does anyone have one of these MP Brakes Booster set ups, with the "level" mount bracket?

I recently installed a Wilwood Master Cylinder in my 67, and it's much longer then my previous one. So much so it's making contact with the hood, not allowing it to close all the way on that side. The booster I have now is from Detroit Speed. The MP Brakes one, well the mounting bracket anyways, looks like that would cure that.

https://www.mpbrakes.com/booster-ma...nt.asp?catid=B28C287B04654347A4326D77E1C593FF

Sent from my SAMSUNG-SM-G930A using Tapatalk
 

·
Registered
Joined
·
1,821 Posts
Does anyone have one of these MP Brakes Booster set ups, with the "level" mount bracket?

I recently installed a Wilwood Master Cylinder in my 67, and it's much longer then my previous one. So much so it's making contact with the hood, not allowing it to close all the way on that side. The booster I have now is from Detroit Speed. The MP Brakes one, well the mounting bracket anyways, looks like that would cure that.

https://www.mpbrakes.com/booster-ma...nt.asp?catid=B28C287B04654347A4326D77E1C593FF

Sent from my SAMSUNG-SM-G930A using Tapatalk
Are you using the DSE booster brackets?

https://www.detroitspeed.com/brakin...-reduced-angle-1967-81-camaro-firebird-050302
 

·
Premium Member
Joined
·
1,881 Posts

·
Registered
Joined
·
1,059 Posts
Discussion Starter #4

·
Registered
Joined
·
1,059 Posts
Discussion Starter #5
I had a similar problem:

https://www.camaros.net/forums/16-b...29-possible-change-master-cylinder-angle.html


I bought a set of Detroit Speed brackets that changes the angle. If forced me to use the manual brake hole on the brake pedal instead of the power brake hole.


https://www.summitracing.com/parts/dsr-050302

before:
[/url]master cyl 4 by Patrick Smith, on Flickr[/IMG]



after:

[/url]master cyl 12 by Patrick Smith, on Flickr[/IMG]
Ahh ha! That's the ticket right there. Did that affect the brake light switch? Will I have to relocate that? Or it can stay where it is now?

Sent from my SAMSUNG-SM-G930A using Tapatalk
 

·
Premium Member
Joined
·
1,881 Posts
It changes the angle of the rod that is connected to the vacuum booster. The brake light switch does not change.
 

·
Registered
Joined
·
1,059 Posts
Discussion Starter #7
It changes the angle of the rod that is connected to the vacuum booster. The brake light switch does not change.
Nice! I just ordered the bracket. Thanks for the pics, that helped a lot

Sent from my SAMSUNG-SM-G930A using Tapatalk
 
1 - 8 of 8 Posts
Top