[1stgenCR]

Thought I would share some of the results of my rattle can paint job on my 68 grill.

Prepped it using a very fine scotch brite pad and warm soapy water. Used Krylon Fusion platic paint. Satin black. Used about 10+ very fine coats.

 

[SixtyAte]

Looks great. I always use Krylon Plastic paint on plastic parts because that is what it is made for and adhears great.


Kev

 

[HwyStarJoe]

Looks great. :thumbsup:
The Fusion stuff does work well.... especially when their primer is used, and the colors are very good.

 

[68DaveV]

Looks great. I used the same stuff on my grill. First I used Bulldog adhesion promoter. Some of the plastic interior pieces that I didn't use the Bulldog on are wearing much worse than where I used it. I highly recommend it. The Fusion is a really good product also.