Team Camaro Tech banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
13,704 Posts
:eek: The U-joint should have NO noticeable side play. :eek:
Are you sure when you reinstalled it you got the ends down into the registers on the yoke? Can you see runout in the drive shaft?
If the U-joint was okay before you started you may want to remove the straps/caps, check to be sure all the bearings are still in place and reinstall the u-joint in the yoke and check again.

Hope this helps
 
1 - 1 of 1 Posts
Top