Team Camaro Tech banner

1 - 20 of 234 Posts

·
Registered
Joined
·
781 Posts
Discussion Starter #1
Hey guys, so thought I'd share the completion of my 4th and FINAL build of my 69 pro touring Camaro. This will take place over the next few months, and will have a TON of custom bits. I'm sure a lot of you are familiar with my bright blue Camaro, so here is a short list of the changes ...
Mini tub with complete new paint (same colour/new stripe)
Some body modifications
New wheels (below)
Complete new interior

Ok, so lets start with the new wheels

New for 2016, Forgeline CV3C 20/19
Rears 335/30/20's
These are sooooo bad ***, in person these are just insane




 

·
Registered
Joined
·
781 Posts
Discussion Starter #2
New console build ... so far about 20+ hours already
Will not be going with the carbon fibre, just wanted to see how it looked
custom made shifter plate with the E-Stopp electric brake button (getting anodized black)



 

·
Registered
Joined
·
781 Posts
Discussion Starter #3
 

·
Registered
Joined
·
781 Posts
Discussion Starter #4
Fesler flush glass arrived

 

·
Premium Member
Joined
·
1,979 Posts
Can't wait to see what goodies you have in store for your build. Console looks great! Are you planning on painting or staining the pine or wrapping it?
 

·
Registered
Joined
·
781 Posts
Discussion Starter #7
Jon, thank you ... ya, hope it turns out as nice as my vision is for this last round

Greg, yes getting wrapped in leather with no padding, and the top is getting powder coated satin black to match up with dash, and likely powder coating the machined shifter plate gloss black.

Cheers
Steve
 

·
Registered
Joined
·
13 Posts
Wow Steve, so your switching things up again on your 69!?!? What all are you re-doing on the interior? I want first dibs on the red stiched Recaro's if your planning on something else!!!

I've got most of my red stiched TMI interior, center console and the one piece headliner sitting in the garage. I've got the motor getting the accy, clutch, bellhousing and T56 magnum getting ready to be assembled so we can look at getting the drivetrain installed.
 

·
Registered
Joined
·
781 Posts
Discussion Starter #10
Jacob, yessir all gone .. LOL, sorry buddy
Now, more details on your build !!?? You've got some real nice stuff happening' there

Cheers
Steve
 

·
Registered
Joined
·
781 Posts
Discussion Starter #13
Thank Ryan, wrapped in leather by the end of the week
Also, PM'd you ...

Cheers
Steve
 

·
Registered
Joined
·
781 Posts
Discussion Starter #14
Update ... Console is almost complete (waiting on some powder coating)
Travelled to Buffalo to pick this up yesterday ... quality is outstanding

 

·
Registered
Joined
·
781 Posts
Discussion Starter #15
and some more engine bay stuff from Ring Brothers




 
  • Like
Reactions: frog7151

·
Registered
Joined
·
781 Posts
Discussion Starter #16
Well, I have to say this came out better than I expected. Console 99% done ... about 50 hours to complete



 

·
Registered
Joined
·
781 Posts
Discussion Starter #17
Pulled apart the Dakota Digital AC/climate controller and powder coated the bezel gloss black

 
  • Like
Reactions: frog7151

·
Registered
Joined
·
781 Posts
Discussion Starter #18
TMI door panels, tore them apart, remade the cheap insert panels with proper board. The doors will be recovered in black leather and properly stitched.
Had the machine shop make me some aluminum billet inserts, powder coated black and counter-sunk the Ringbrothers washers.

Have some idea on the colour and pattern of the new panels (depending on 'new' car colour)

 

·
Registered
Joined
·
781 Posts
Discussion Starter #20
Thanks Don (8

So, the new Precision Metal flush mount Racepak bezel showed up yesterday ... perfect fit



VERY nice fit ...

 
1 - 20 of 234 Posts
Top