[CFunK]

Hey guys, I am trying to finish up the braided steel line setup I started 2 months ago and need to know what adapters I will need at the tranny (TH350) and the upper and lower tranny ports at the radiator for -6AN fittings.

 

[wayner]

Well the rads are usually 5/16" inverted flair, but have also seen 3/8" inverted flare. At the tranny the case is tapped 1/8" NPT. on a THM350

http://www.tciauto.com/tech_info/cooler_fittings.htm#GM

 

[CFunK]

Anyone know where I can find RED 3/8 to -6 adapters?

Everyone sells blue.

[ 03-24-2005, 04:58 PM: Message edited by: CFunK ]

 

[squid]

http://www.tciauto.com/Products/TechInfo/cooler_fittings.asp

I couldn't get the previous link to work, so I am hoping this one will.

 

[68zz502fi]

the TCI reference posted for trans cooler lines appears incorrect for 4L80. I have a 4L80 that I pulled the fittings from to inspect and the threads in the trans are most definately not pipe thread. does anybody know what they are?