Team Camaro Tech banner
1 - 1 of 1 Posts

· Super Moderator
1967 RS Bench seat 327/2bbl/PG
Joined
·
33,802 Posts
Let me give my 2 cents.....

Yes, one should balance the surfaced flywheel. You have changed the balance of it. At the same time, take new clutch plate and cover, have them neutrally balanced as one unit. Hopefully, machine shop would mark each place so as it can be assembled in same matter.

It would be even nicer if you still have the balance sheet from engine, this way it can be determined if those were neutrally balanced.

Vibration will cause the rear main seal to leak, I know you don't want to hear this, but, out-of-balance will also destroy the rear main bearing. Think of an out-of-balance tire.

------------------
Everett 68/350/PG/11.90/115mph
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top