Team Camaro Tech banner

1 - 3 of 3 Posts

·
Registered
Joined
·
212 Posts
Discussion Starter #1
Can anyone tell me the correct lenghts (approximet) for the Fiber Optic cable for the lower directional and head light for a '69 Camaro. I'm replacing an original setup that was cut up and have located an individual that will sell me the fiber. I need to know how long they should be..

Thanks !!

Wacky
 

·
Registered
Joined
·
505 Posts
Just take some electrical wire and feed it were the fiber optics go from vigil on fender to headlight and anoter to parking light..then measure the wire needed.I'd say 18" for headlight...42" for turn. I had a 68 RS with the monitering system.


Gary
 

·
Registered
Joined
·
212 Posts
Discussion Starter #3
Gary that helps but the car I'm restoring for a customer has the clip removed and hoped that someone out their could measure there fiber leads and tell me within a few accurate inches before I spend the bucks on the original fiber. I would rather be long than to short.. Thanks for the help though..

Wacky
 
1 - 3 of 3 Posts
Top