Team Camaro Tech banner
1 - 3 of 3 Posts

·
Registered
Joined
·
322 Posts
The mount in the picture is a 1970 only F-body Muncie mount, 1971 and later all Muncie 4-speeds used the 764 32 spline tail housing and used a different shifter mount.
I also make custom shifter mounts for 1967-8-9 Camaro's , to be able to use the late Muncie and Super T-10's with the 32 spline tail housings, and have the shifter in the correct location.
E-mail me for more info... [email protected]

Hope this helps... Crash
 

·
Registered
Joined
·
322 Posts
Paul's mount is nice, but it is based off the Hurst mount that is designed for the small block location only, with only 2 mounting locations.
Usually the one mounting position works, but some times it doesn't.

All of the mounts I make, the lower mounting hole is slotted like the OEM shifter mounts are made so you can adjust the shifter front to back in the console.

I have specific mounts for 1967-8 for both big block and small block locations and 27 or 32 spline tail housings. Including Super T-10's
I have specific mounts for 1969 for both big block and small block locations and 27 or 32 spline tail housings. Including Super T-10's

Hope this helps... Crash
 
1 - 3 of 3 Posts
Top