Team Camaro Tech banner
21 - 40 of 52 Posts
Discussion starter · #21 · (Edited)
Well, they came and they are very, very light nice!

My 15x8 rally with a 275/60r15 dr weighed 61lbs a piece.

They should be on by this weekend, I will post some pics of my sweet rims and ugly brakes LOL!




Image


Image
 
Discussion starter · #24 ·
Well the rears fit great, the front is a different story.

I guess the front rotors (china) stud holes are drilled a little off, all the rims bolt on the rear by hand no problems. But they will not bolt to the front rotors.
I guess with these shanked lugs the studs better be straight or you screwed!
 
Well the rears fit great, the front is a different story.

I guess the front rotors (china) stud holes are drilled a little off, all the rims bolt on the rear by hand no problems. But they will not bolt to the front rotors.
I guess with these shanked lugs the studs better be straight or you screwed!
Maybe they sent you some 5x4.5's(Mustang/Mopar) instead of 5x4.75's(GM)????
 
Discussion starter · #26 ·
Maybe they sent you some 5x4.5's(Mustang/Mopar) instead of 5x4.75's(GM)????
Thats what I thought but they bolt on the rear fine.
 
Discussion starter · #28 ·
Discussion starter · #29 ·
I have them on my prostreet camaro. I like them alot. I did upgrade my brakes to Baer. I had to redrill my back rims due to I run 5/8 racing studs.

Image


Image


Image


Image


Image
AWESOME car Mike:thumbsup:
 
Discussion starter · #31 ·
My fronts are 15x7 3.50bs.
 
I have them on my prostreet camaro. I like them alot. I did upgrade my brakes to Baer. I had to redrill my back rims due to I run 5/8 racing studs.

Image


Image


Image


Image


Image
I could be wrong so dont burn me if I am, but are your rotors facing the wrong direction??
 
Jim, I love the way your car sits, and really like the wheels. I still may go with them to save a few pounds, the rallys have to be heavy.

What did you use for springs to get it to sit the way it does? Love the stance.
 
Jim, I love the way your car sits, and really like the wheels. I still may go with them to save a few pounds, the rallys have to be heavy.

What did you use for springs to get it to sit the way it does? Love the stance.
Hey thanks. One of the reasons I bought the Street Lites was their weight. The rear has Caltrac split monos with Caltrac bars and the front has Moroso trick springs with 1-1/4 coils cut out. That's it.
 
Hey thanks. One of the reasons I bought the Street Lites was their weight. The rear has Caltrac split monos with Caltrac bars and the front has Moroso trick springs with 1-1/4 coils cut out. That's it.
Thanks for the input. Are they the stock height split monos? And do you recall which # moroso springs? (it's a small block isn't it?)


Thanks and sorry to hijack! :thumbsup:
 
Thanks for the input. Are they the stock height split monos? And do you recall which # moroso springs? (it's a small block isn't it?)

Thanks and sorry to hijack! :thumbsup:
Yes they're the stock height splits. On the Morosos, I don't recall the part number but they're the lighter of the two sets available for the car. I put the stiffer set in first and they were too high. Yes it's a small block.
 
I know this is an old thread but I will post my set up.
front 15x4 1.75 bs
back 15x8 4.50 bs
 

Attachments

21 - 40 of 52 Posts