Team Camaro Tech banner
1 - 11 of 11 Posts
I have standard belts if you decide to install something until you find what you need. Are you looking for specific date codes? Another person that might have some is Kevin W on this site.
 
Save
I finally had a chance to look. Found a crappy pair of males for the roof side that will go cheap. Week 49 of 68 (for a Dec/Jan/Feb car) The webbing can be cleaned and dyed and the rust spots polished out (if you are handy :)), but would need to be restored for a show car. Do you need the female floor side too?
279826
279827
279828
 
Discussion starter · #6 ·
Kevin.

Sorry for the very late response but I had a lot of issues that needed more attention.
Do you still have the shoulder harness? I need both pair of the female and male's.
Also what are you asking for them?

Thanks
Dennis Smith
dlsmith101@verizon.net
 
Discussion starter · #8 ·
My interior is deluxe and I have chrome steel buckle cover with GM in the center and they are not brushed. Maybe someone chromed them.
The deluxe has a model# 1952.

Let me know what you find

Thanks
 
Dennis, the 69 buckle covers are satin chrome from the factory. Its a thin chrome that develops rust spots over time.
A 1952 female buckle attached to the trans tunnel is actual for the shoulder harness. A lap belt female should be 1907 (same as retractor).


Check the model numbers (labels) on all your belts, to make sure you know what you have. i.e., someone might have mounted front belts in the rear.
 
1 - 11 of 11 Posts
You have insufficient privileges to reply here.