How much clearance between tailpipe and tire

HvyMetal68 · Nov 3, 2022

With the new 275s on the rear I've got maybe a finger width of clearance between the tailpipe and the tire.

I know, the whole exhaust should be replaced but I'm hoping to take care of that when the engine is replaced.

In the meantime, is that sufficient clearance? It feels a little close to me but maybe it's fine.

SoCal805 · Nov 3, 2022

IDK how much travel you have on your rear axle but unless you are jumping the car I think you are fine with that clearance. Given the condition of that exhaust....a big pair of pliers or BFH would dent the pipe enough should there be a problem in the interm

Your new exhaust can be fitted to not be an issue

DOUG G · Nov 3, 2022

Only one way to know 100%.

I think you'll be fine if no hard corners at speed.

HvyMetal68 · Nov 4, 2022

The rear suspension seems to be extremely stiff, and if I'm jumping the car something has gone horribly wrong.

I'm probably also a ways out from corners as speed. I was a little more concerned with heat from the tailpipe possibly damaging the tire if I were to sit with the engine running for a prolonged period of time. I don't tend to drive to places I get stuck in traffic much, but you never know.

fairfax1000 · Nov 4, 2022

Drive it slightly more aggressively than you normally do, then check for marks.

How much clearance between tailpipe and tire

HvyMetal68

SoCal805

DOUG G

HvyMetal68

fairfax1000

Top Contributors this Month

Recommended Communities