was told id need billett spacers where do i get these and what size? looking for the silver z06 type wheels all around for a autocross build
how can i run corvette wheels on my 67 camaro?
dads 67 rsss
1 - 7 of 7 Posts
Joined
·
162 Posts
was told id need billett spacers where do i get these and what size? looking for the silver z06 type wheels all around for a autocross build
The newer z06 wheels? What front end is in the car? They are around 8” back spacing? Rear need about 3” spacers. Front won’t clear fender wells. I have speedtech frame so I can use em on front as long as I use there fender wells or run with out them.
Joined
·
162 Posts
im sorry im looking at a aset of c5 wheels stock ft end
Me personally, I would never run a 3" spacer on anything. Would they even pass a tech inspection at an autocross event?
Autocross build = you build the suspension so you don't need spacers, just my opinion. If doing a cost conscious build, there are plenty of ways to build the stock suspension for autocross and use wheels that fit without spacers.
Autocross build = you build the suspension so you don't need spacers, just my opinion. If doing a cost conscious build, there are plenty of ways to build the stock suspension for autocross and use wheels that fit without spacers.
Joined
·
9,355 Posts
Some good info here
Joined
·
9,355 Posts
1 - 7 of 7 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
