Can someone direct me to the proper page in the assembly manual that shows the installation of the 69 standard kick panels? I could only find the installation of the A/C kick panels and they didn’t show the screw that fastens the upper part of the panel in the door jamb. I have the Master Interior Fastener kit, which includes the screws that surround the vent area, but I can’t see where they have included the door jamb screws. They said they need the GM part number to try and locate them.
Kick panel fastener located in door jamb
LeonardSt
1 - 14 of 14 Posts
Joined
·
46 Posts
Can someone direct me to the proper page in the assembly manual that shows the installation of the 69 standard kick panels? I could only find the installation of the A/C kick panels and they didn’t show the screw that fastens the upper part of the panel in the door jamb. I have the Master Interior Fastener kit, which includes the screws that surround the vent area, but I can’t see where they have included the door jamb screws. They said they need the GM part number to try and locate them.
Attachments
They probably were not installed on the Chevy side of the plant so they are not included in the factory assembly manual. They were installed by the Fisher Coach side before they were sent thru the hole in the wall to Chevrolet. Sorry, I can't help more.
I am guessing they are similar to the trim screws on the lower door panel but not sure. This is what AMK says they are:
![Image]()
Joined
·
46 Posts
When I talked to AMK, they didn’t know. They asked me to find the part number and then they could help. I thought it might be a black screw? Someone with a 69 should be able to post a photo.
I went out too take a photo but my kick panels don't have that mounting ear.
Joined
·
46 Posts
Interesting. Do you have A/C? I don’t. Maybe that’s the difference? My originals and reproductions both have the ears.
No, I have aftermarket panels with the speaker bulge molded in so I guess they just decided to forego that mounting ear.
Joined
·
46 Posts
Do you know what fastener was used?
Not an easy question for me to answer. I used late design kick panels on my early build Camaro resto because of a color change. The original screws are possibly bagged up in a box somewhere because I never drilled a new hole to match up with the late design kick panels. They have been on the car maybe 25 years and I have slept since then.
Joined
·
76 Posts
Here is what mine has. Probably not factory. Sorry for the sanding dust the shop is a wreck.
![Image]()
![Image]()
Joined
·
46 Posts
Thank you! That looks more like I expected them to look. Now to find a couple of them.
1 - 14 of 14 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
