4 speed headers

Fried Okra · Nov 13, 2015

In the market for a very reasonably priced set of ceramic coated headers for my 69 350 4 speed car. No A/C but has P/S.

I see several but they won't fit 4 speed cars. Just wondering what you guys are running. I would consider the tri y design as well. Just don't want the shorty kind. Brand, part #, and vendor, please, if you still have that info. Thanks

mike's blue67 · Nov 13, 2015

I have Dyna Tech 1 3/4 to 1 7/8 stepped headers on mine, Fit great look great for 6 years now, but they are not what you would say reasonable.

Matt 69 · Nov 13, 2015

I had Hooker Super Comps with 1 3/4'' primaries in my 69 4 speed car and they cleared the power steering and the reverse lockout linkage as well.

Fried Okra · Nov 14, 2015

Thanks ...I don't currently have the lockout hooked up but would like to reinstall it so that my backup lights will work. I would still like something more in the $300 range is that's possible.

Matt 69 · Nov 14, 2015

$300 headers are not a problem, it's the coatings that drive up the cost. I recently purchased a set of Hooker Competition headers for my big block and paid $150 for them brand new. I then had them Jet Hot coated for $345. The coating cost more than twice the price of the headers.

reelknots · Nov 14, 2015

I installed Summit ceramic coated headers a few years ago and they still look great. Cost was around $250. I don't have the reverse linkage so I installed a backup switch on my shifter.

keithl1967 · Nov 14, 2015

Check out Patriot headers, ceramic coat...Bought a set 3 or 4 years ago. They are made by the same folks that make Doug's headers, but cost considerably less...

Also, the return spring for the clutch pedal routs between the tubes, so yo can actually connect the spring and rod to the factory location on the Frame mount for the motor...

Really nice quality and PERFECT fitment--also PLENTY of clearance if you have or awnt to upgrade to power steering...

I really dont know why these don't get more attention...

http://www.summitracing.com/parts/pte-h8047-1/overview/year/1967/make/chevrolet/model/camaro

68RS/SS Beast · Nov 14, 2015

I bought the Flowtech headers from Summit. $332.95 I run a 496 stroker.

kookykrispy · Nov 14, 2015

I'm running generic cheapie headers on my '68. They fit the 4 speed just fine. Not sure what brand they are, since there was no brand or part number on them. I got em off craigslist for $40

I noticed the summit brand headers does not say they won't fit 4 speed? I think most headers fit 4 speed. On my headers, the clutch linkage is a little tight, but it still fits

keithl1967 · Nov 14, 2015

68RS/SS Beast said:
I bought the Flowtech headers from Summit. $332.95 I run a 496 stroker.

Ive got a pair of flowtechs on the shelf...they didn't fit, so I went with Patriot, which were perfect...

The passenger side flowtech pipe hit the firewall....not sure if I just got abad set or what, but did not work for me...

4 speed headers

Fried Okra

mike's blue67

Matt 69

Fried Okra

Matt 69

reelknots

keithl1967

68RS/SS Beast

kookykrispy

keithl1967

Top Contributors this Month

Recommended Communities