Reading through previous posts I haven't quite found the answer to my question so I was hoping to find answers from you guys with much more knowledge than myself. I have a 69' RS coupe that started as a plain jane 350 4-speed car. Over the years Z/28 stripes, a cowl hood, spoiler and Super Sport emblems were added. I want to swap the SS emblems for Z/28 ones and am curious if the 350 on the front fenders is interchangeable with Z/28. Are the placement holes the same? Along with the SS between the taillights on the back of the car? I can't seem to find the templet for the 350 to compare measurements with the Z/28. I also cannot find the dimensions of both the 350 emblem and the Z emblem. Thanks!
1969 Z/28 Emblems
Todd0990
1 - 6 of 6 Posts
Reading through previous posts I haven't quite found the answer to my question so I was hoping to find answers from you guys with much more knowledge than myself. I have a 69' RS coupe that started as a plain jane 350 4-speed car. Over the years Z/28 stripes, a cowl hood, spoiler and Super Sport emblems were added. I want to swap the SS emblems for Z/28 ones and am curious if the 350 on the front fenders is interchangeable with Z/28. Are the placement holes the same? Along with the SS between the taillights on the back of the car? I can't seem to find the templet for the 350 to compare measurements with the Z/28. I also cannot find the dimensions of both the 350 emblem and the Z emblem. Thanks!
Attachments
Joined
·
5,762 Posts
Do you have a copy of the AIM? (Assembly Instruction Manual)
on page 142 are the engine call out drilling instructions (UPC 11-13 A6)
On page 471 are the Z/82 drilling instructions (Z28 B1)
My copy is not really clear on the engine call outs and I find the instructions confusing so I feel it's best you look for your self and draw your own conclusions.
Or you can just take off the numbers and try the Z/28
Jeff
on page 142 are the engine call out drilling instructions (UPC 11-13 A6)
On page 471 are the Z/82 drilling instructions (Z28 B1)
My copy is not really clear on the engine call outs and I find the instructions confusing so I feel it's best you look for your self and draw your own conclusions.
Or you can just take off the numbers and try the Z/28
Jeff
Joined
·
12,525 Posts
Yes, the rear emblem (bowtie/RS/SS/Z) are all the two pin version). The front fender is a different animal
Thread with some pics
http://www.camaros.net/forums/showthread.php?t=97624
A perfect thread with pics on installing a 69 Z emblem on a fender with engine callouts (covering them up )
http://www.camaros.net/forums/showthread.php?t=209350
Thread with some pics
http://www.camaros.net/forums/showthread.php?t=97624
A perfect thread with pics on installing a 69 Z emblem on a fender with engine callouts (covering them up
)http://www.camaros.net/forums/showthread.php?t=209350
1 - 6 of 6 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
