Hi everyone, need help again. On page 430 ( UPC Z22 ) A9. I have the 4 dimples however the diagram ( view B ) shows 2 additional holes located between the dimples. My question is, are they needed for the vacuum hose retainers which appears on page 432 ( A10.5 ) There also appears to be a 3rd hole located at the back side of the inner fender skirt. I have a 68 ss/rs with the L35 block. Thanks.
additional dimples/holes in fender skirt
old person
1 - 7 of 7 Posts
Joined
·
170 Posts
Hi everyone, need help again. On page 430 ( UPC Z22 ) A9. I have the 4 dimples however the diagram ( view B ) shows 2 additional holes located between the dimples. My question is, are they needed for the vacuum hose retainers which appears on page 432 ( A10.5 ) There also appears to be a 3rd hole located at the back side of the inner fender skirt. I have a 68 ss/rs with the L35 block. Thanks.
It's a 68. Frank you should put the year of your Camaro and any descriptive details in your signature.
No, the 2 additional holes (between the dimples) are for the washer bottle bracket on L6 or big block cars. The hose retainer for big block or K30 cars is the 2nd dimple from the front.
I'm not sure what the 3rd hole you're referring to is ? The rear hose retainer ?
No, the 2 additional holes (between the dimples) are for the washer bottle bracket on L6 or big block cars. The hose retainer for big block or K30 cars is the 2nd dimple from the front.
I'm not sure what the 3rd hole you're referring to is ? The rear hose retainer ?
Joined
·
170 Posts
Thanks for the replies still trying to get it all the holes correct. It appears on several pages that the first 2 holes from the front were the washer bottle mounting bracket. Thanks again for the correction.
None of the dimples are used for the K30 option. There are only three holes drilled for the RPO K30 option in the skirt. Two to mount the regulator and one to hold the speedometer cable. All the wiring and hoses are held in place with straps
Look at AIM K30 A2 and you will see the holes drilled for both K30 and Z22 options. There are no dimples in the skirt for the K30 option. They were measured and drilled on the line.
Bob
Look at AIM K30 A2 and you will see the holes drilled for both K30 and Z22 options. There are no dimples in the skirt for the K30 option. They were measured and drilled on the line.
Bob
Bob, I have no experience with K30, just pointing out what the AIM says. Z22, A10.5 shows the second dimple from the front used for the RS hose retainer (strap) on big block and K30 equipped cars.
Just pointing out that sometimes the AIM is incorrect.
Bob
1 - 7 of 7 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
