Team Camaro Tech banner
1 - 10 of 10 Posts

mikepmntl

· Registered
Joined
·
5 Posts
Discussion starter · #1 ·
I have an 87 Iroc 305, with a new radiator, new hoses, new t-stat, new water pump, but fans are spinning backwards when they turn on, so no air hits the radiator when i'm at idle ....... ? any help ...... thanx
 
Discussion starter · #5 ·
there is only one way to put the plug into the fan ...... although some of the wires going and coming from the relays might have been changed around ..... ? does anyone have a diagram or know how they are supposed to go ... ?
 
aren't the fans supposed to pull air THRU the radiator? i'm assuming of course the fan sits between the radiator and the motor.
 
Mike,
I had a blue 87 iroc "back in the day" lol Are the fans something you just now installed? If so, you need to check the wiring. If they are stock from the factory, I don't see how they could just start spinning backwards out of the blue like that :confused: Let's see if other guys chime in...

Dano :beers:
 
Discussion starter · #9 ·
Hey guys i have solved the problem ...... thanx for all the input, what i did was .... i swithced the positive and negative cables around that were going directly to the fan .... and it worked: the fan spun clockwise and there is no more heating up on my iroc..... thanx for all the feedback ..
- Mike
 
mikepmntl said:
nah man, it's supposed to blow air THRU the radiator, thats what helps it out and keeps it cool .... ANY OTHER SUGGESTIONS OR HELP ... thanx for the input so far guys ...
:confused: My T/A fan was a 'puller' setup. It pulled air in from the outside of the car. Are you saying yours pushes air from the engine compartment through the radiator?
 
1 - 10 of 10 Posts