Off topic but... Is there a glue/adhesive that can be used to seal a crack on a plastic carburator float? One that can withstand gasoline? The new float, if it's still available for a 23 year old ricer, will take 2 or more weeks to get here and I'll like to use the car before that. Any suggestions.
Crack in plastic carb float
ORENCH
1 - 8 of 8 Posts
Off topic but... Is there a glue/adhesive that can be used to seal a crack on a plastic carburator float? One that can withstand gasoline? The new float, if it's still available for a 23 year old ricer, will take 2 or more weeks to get here and I'll like to use the car before that. Any suggestions.
Joined
·
2,765 Posts
Could you use the epoxy that is used to seal up the well plugs on the bottom of QJets?
They have epoxy gas tank patch kits at the auto stores. I would think that would patch a float BUT the weight will be off so the float will ride a little lower in the bowl. On a Holley, we would not have trouble with this because of the sight hole but on other carbs this can be an issue.
-Mark.
-Mark.
Joined
·
2,765 Posts
What kind of epoxy is used to cover the well plugs on a QJet?
1 - 8 of 8 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
