[JibberJabber]

I’m having a problem with throwout bearing fitting into two different clutch forks that I’ve purchased. The opening on the fork is 1/8 in smaller than the fork I removed. Maybe the powder coating? Has anyone had to alter a clutch fork to make the bearing seat inside the fork? I’ve used a caliper to measure and confirmed the opening to be 1/8 in smaller on the new one.

 

[JibberJabber]

So the forks that classics industries sold me are incorrect? Twice? Plus one of them is the one that came out of the car.

 

[JibberJabber]

Humm