TV cable for a 700R4

Hot 67 · Jul 23, 2014

Hi folks, It's been a long time since I 've been on here to ask a question, but I hope you guys will help me out anyway.
I've got a 350 small block with a 700r4 in my 67 Camaro that I have recently removed the TPI fuel injection set-up and gone back to a Holley 4160 4 barrel.
I now find myself needing help to determine what the proper TV cable needed for this set up will be. The cable that was installed with the TPI set-up is entirely to long.
If anyone can point me in the right direction as to the correctly needed TV cable I will certainly appreciate your help.

Thanks,
Jerry
67 Camaro Convertable
350 small block
700R4 tranny
373 posi rear gears

rojo · Jul 23, 2014

If you don't mind spending a few bucks this system is excellent.

http://www.bowtieoverdrives.com/catalog/catalog_inc/viewitem.php?ITEMID=217

click · Jul 24, 2014

Agree with Robert. used Bowtie's stuff, fit like a glove when I had my 700r installed. :thumbsup:

L Holmes · Jul 24, 2014

Jerry: When 700r4 into your car did you buy a conversion "kit" or do it piece by piece?

What shifter do you have in the car now? thanks

Hot 67 · Jul 24, 2014

My conversion was done as a complete unit.
Installed TPI 350 engine and 700r4 and 373 gears at same swap.
I used a Bowtie overdrive TV cable and throttle cable all as a package( was then using a TPI Injected engine)
Shifter is a stock Comaro shifter for a TH 400 tranny including netural safety switch which all worked great togerther.
I have now gone to a Carburated engine (350 Small block with a 4160 Holley 4 barrel) and now need the proper TV cable. Carb has Holley brackets 20-121 and 20-95.
I'm now only ned the correct cable to go with this set up.

Jerry

L Holmes · Jul 24, 2014

The 67 shifter or the 68 / 69 stirrup shifter? How did a 3 speed shifter work with the 4 speed auto? Sorry for all the questions.

Vega$69 · Jul 25, 2014

Here you go

http://www.shiftworks.com/camaro-68-72.htm#200

X-77 keith · Jul 25, 2014

I would use a GM cable. I would use a used cable if I had too. Any car from the 80's or 90's with a V8 will work, even the trucks. Summit sells a nice bracket to make it a seamless set up for a Holley. The bowtie kit is pricy, and way more difficult than the GM cable and the Holley bracket. The bracket is strong, and you don't need to have to use two more gaskets, a plate, or any of that adjusting stuff. Been using this set up for years on many cars and trucks. Under $50.00.

Vega$69 · Jul 25, 2014

Lokar makes a nice set-up with brackets.

http://www.jegs.com/i/Lokar/625/KD-...N=pla&catargetid=230006180000514901&cadevice=c&gclid=CMPhhtGY378CFWuCMgodBHwAHQ

BPOS · Jul 25, 2014

I've used this universal cable. Has a little collar with a lockdown screw to set desired length. It's in the picture - you have to look closely. Worked fine. A local trans parts place should have it. http://www.jegs.com/i/TCI/890/376800/10002/-1?parentProductId=753346

TV cable for a 700R4

Top Contributors this Month

Recommended Communities